Greenbridge Construction Inc.

Upgrade or adding infrastructure to a site to increase it’s utility and use, Greenbridge Construction has a team of experienced professionals that have significant building construction and infrastructure experience, as well as work on many major civil construction projects across Maryland, DC Metro, Virginia and Pennsylvania areas.

WRAIR Campus Boiler – Washington DC

Modify and upgrade Central Steam Plant (CSP) and heating Distribution System for Walter Reed Institute Of Research (WRAIR)
Click Here To View This Project

UPGRADE TO THE MAIN SUBSTATION BUILDING 1870 &
SWITCHING STATION BUILDING 3297, JOINT BASE ANDREWS

Furnish labor, materials and equipment for Upgrades to the Main Substation Building 1870 and Switching Station Building 3297 at Joint Base Andrews, Maryland in accordance with attached Project Specifications and Drawing for the following scope of work: Site work, Concrete & reinforcing rebar associated activities

Click to read more

New equipment pads and piers as seen on sheet 1S-101

• 1S-101/ 1S-301 equipment pad piers -total 21 CY
• 1S-101/ 1S-301 equipment pad Footers -total 190 CY

New Concrete driveway apron at the backside of bldg. 1870 see sheet 1C-102

• New Concrete driveway asphalt full depth 329.45 ton
• GAB full depth prep 514.76 ton
• Driveway asphalt surface 118.71 ton
• Apron at the backside of bldg. 1870 75sf 1.4 CY

Equipment pad in bldg. 1870, sheet 1S-103

• Building 1870 3 1/2″ equipment pad 1 @ 840.5 sf
• Prepped for leveling channels

Firewall footer and fire wall as seen on sheets 1S-101 & 1S-301

• 1S-101 Fire wall footer 1 11 CY
• 1S-101 fire wall wall 1 25 CY
  TOTAL 36 CY

1S-101 Transformer Pad

• 2 walls @ 24 CY 48 CY
• 2 base @ 65 CY 130 CY
• 2 pad @ 75 CY 150 CY
  TOTAL of 327 CY

Side walk and transformer pads at bldg. 3297, sheet 2C-101

• 2C-101 Sidewalks at bldg. 3297
• Sidewalk 220sf 3 CY
• Apron/ curb 60sf 1.1 CY

Equipment pad in bldg. 3297, sheet 2S-102

• 2S-102 equipment pad in bldg. 3297
• 6.4 CY 686.8 sf

7 light pier/ base

• 1S-301/ 1S-101 light pole footer 7ea total 5 CY
• 1S-301/ 1S-101 light pole pier 7ea total 4.5 CY
  TOTAL 9.5 CY

1. New equipment pads and piers as seen on sheet 1S-101,
2. New Concrete driveway apron at the backside of bldg. 1870 see sheet 1C-102,
3. Equipment pad in bldg. 1870, sheet 1S-103,
4. Firewall footer and fire wall as seen on sheets 1S-101 & 1S-301,
5. Side walk and transformer pads at bldg. 3297, sheet 2C-101,
6. Equipment pad in bldg. 3297, sheet 2S-102
7. 7 light pier/ base

C/249 Grounding Grid Installation at motor pool at the corner
of Pohick and Theote Roads on Fort Belvoir Va.

Construct a 1 ohm electrical grounding grid in a unit motor pool for the operation and maintenance of power generation and distribution equipment. Install a 280’ x 90’ grounding grid.

• 3x 280’ North to South runs of 1/0 bare stranded copper conductor space 45’ OC
• 15x 90’ East to West runs of 1/0 bare stranded copper conductor spaced 20’ OC
• 57x ¾” x 10’ grounding rods enclosed in ground access wells located at the finished grade after paving.
• Grounding rods will be placed at all copper conductor intersections and 10’ OC along the first and last East to West 90’ runs. (Fig 1)
• Install ground grid at the location specified in figure 2.
• Installation of ground access wells shall be flush with the finished asphalt after placement.
• Each access well will contain a clamped replaceable 1/0 copper pig tails capable of being stowed in the well
• Intersections will be joined through a thermo-welding process (e.g. “Cad-weld”)
• Install ground grid at least 24” below grade, backfilled with local material.

Click to read more